| Cincom L20 Adopts module design;
Low running cost;
Flexible combination of simple and complicated treatment;
Product specification
| Model |
L20VIII |
L20IX |
L20X |
L20XII |
| maximum processing diameter |
20mm |
| maximum machining length |
GB machine |
200mm/1 times |
| GBL machine |
diameter of work piece×2.5mm/1 |
| front side maximum drilling diameter |
10mm |
| front side maximum tapping diameter(tapping, screw die) |
M8 |
| principal axis through hole diameter |
26mm |
| principal axis rotational speed |
Max.10,000min-1 |
| rotoary tool maximum drilling diameter |
8mm |
| rotoary tool maximum tapping diameter |
M6 |
| rotoary tool speed |
Max.6,000min-1 |
| subtended tool table rotation tool maximum drilling diameter |
- |
5mm(OP) |
| subtended tool table rotation tool maximum tapping diameter |
- |
M4(OP) |
| subtended tool table rotation tool rotational speed |
- |
Max.7,500min-1(OP) |
| back side tool table rotation tool maximum drilling diameter |
5mm(OP) |
5mm |
| back side tool table rotation tool maximum tapping diameter |
M4(OP) |
M4 |
| back side tool table rotation tool rotational speed |
Max.7,500min-1(OP) |
Max.7,500min-1 |
| back side principal axis maximum clamping diameter |
20mm |
| back side principal axis workpiece maximum stretching amount |
30mm |
| back side processing maximum drilling diameter |
8mm |
| abaxial maximum tapping diameter |
M6 |
| back side principal axis rotational speed |
Max.8,000min-1 |
| tool installation number |
Max.37 |
Max.33 |
Max.44 |
Max.40 |
| tool size |
turning tool |
□12mm(□13mm、□16mm) |
| tool installation clamp |
25mm(GDS107,210)19.05mm |
| fast feeding speed |
whole axis(Y2 axis except) |
32m/min |
| Y2 axis |
- |
8m/min |
- |
8m/min |
| electrical machine |
principal axis drive using |
2.2/3.7kW |
| horizontal structure tool principal axis drive |
1.0kW |
| back side tool table rotation tool drive using |
0.75kW(OP) |
0.75kW |
| subtended tool table rotation tool drive using |
- |
0.75kW(OP) |
| back side principal axis drive using |
0.75／1.5kW |
| cutting oil used |
0.4kW |
| input power |
7.3kVA |
| center height |
1,050mm |
| weight |
2,350kg |
2,400kg |
|
.jpg)
