| Cincom L32 L30 adopts module design;
It is in 4 models;
Flexible combination of simple and complicated treatment;
Product specification
| Model |
L32 VIII |
L32 IX |
L32 X |
L32 XII |
| maximum processing diameter |
32mm |
| maximum machining length |
GB machine |
320mm/1 time |
| GBL machine |
diameter of work piece×2.5/1 time |
| principal axis maximum drilling diameter |
12mm |
| principal axis maximum tapping diameter(tapping, screw die) |
M12(tapping cutting) |
| principal axis through-hole diameter |
39mm |
| principal axis rotational speed |
Max.8,000min-1 |
| back side principal axis maximum clamping diameter |
32mm |
| back side processing maximum drilling diameter |
10mm |
| abaxial maximum tapping diameter |
M10(tapping cutting) |
| back side principal axis rotational speed |
Max.8,000min-1 |
| back side tool table rotation tool maximum drilling diameter |
8mm |
| back side tool table rotation tool maximum tapping diameter |
M6(tapping cutting) |
| back side tool table rotation tool rotational speed |
Max.6,000min-1 |
| subtended tool table rotation tool maximum drilling diameter |
8mm |
| subtended tool table rotation tool maximum tapping diameter |
M6(tapping cutting) |
| subtended tool table rotation tool rotational speed |
Max.6,000min-1 |
| back side tool table rotation tool maximum drilling diameter |
OP |
8mm |
| back side tool table rotation tool maximum tapping diameter |
OP |
M6(tapping cutting) |
| back side tool table rotation tool rotational speed |
OP |
Max.6,000min-1 |
| tool installation number |
Max.30 |
Max.36 |
Max.44 |
Max.40 |
| tool size |
turning tool |
□16mm |
| fast feeding speed |
X1 axis |
32m/min |
| X2 axis |
32m/min |
| Y1 axis |
32m/min |
| Y2 axis |
- |
24m/min |
| Z1 axis |
32m/min |
| Z2 axis |
32m/min |
| electrical machine |
principal axis drive using |
3.7/7.5kW |
| rotoary tool principal axis drive using |
1.0kW |
| back side principal axis drive using |
2.2/3.7kW |
| opposite rotation tool principal axis drive using |
1.0kW |
| back side tool table principal axis drive using |
OP |
1.0kW |
| cutting oil used |
0.25kW |
| input power |
13.2kVA |
| center height |
1,050mm |
| weight |
2,900kg |
|
.jpg)
